Metal Frame Refinishing

Metal Frame Refinishing

Chair Care will sandblast and repaint your furniture with a tough, powder-coated finish that will come out looking brand new and typically last 15+ years.

Sandblasting

The first step in the frame refinishing process is the sandblasting of the metal frame. Whether you have wrought iron or aluminum, all of the existing finish must be removed prior to coating. Sandblasting removes all the rust and old paint and exposes a clean, bare surface.

Inspection

Following our sandblasting process, we inspect the furniture for any broken or cracked welds which may have been disguised by rust or an old worn finish. This can commonly occur, even with normal use, anywhere that two pieces of metal are joined together. If we do happen to find any problems, we will contact you to discuss any necessary repairs and/or your options. The charge for welds is typically $15 per weld to a maximum of $75 per piece.

Powder Coating

Powder coating is a cost-effective, green and durable way to restore your metal outdoor furniture. Our custom matched powder coatings offer the ability to paint the frames of metal outdoor furniture to match or blend with the vinyl and fabric. The powder is TGIC polyester and is formulated for outdoor use. 

The Benefits of a Powder Coated Finish

Powder coating is a dry polyester powder that is electrostatically applied and then baked on at 400 degrees. This is the same type of finish that you see on all the new furniture available today. Chair Care has a wide variety of frame colors and textures to choose from.

Manufacturers use powder coating because it is much more durable and environmentally friendly than the old solvent based wet paint finishes they used to use. Powder coating doesn't chip easily and will not get that "chalky" feel over time. It's the best restorative finish available and the most durable for outdoor furniture.

Available Colors


Below is a wide selection of the powder coating colors we offer, but not all.  If you don't find what you are looking for, please contact us to find your perfect match.

6000 Series Epoxy Polyester Hybrids

Click here to View More

7000 Series Epoxy

Click here to View More

8000 Series Urethanes

Click here to View More

9000 Series TGIC Polyesters

Click here to View More

Fast Cures

Click here to View More

TruColors

Click here to View More

Metallics

Click here to View More

TruAnodize: AAMA 2604 Powder Coatings

Click here to View More

Primers

Click here to View More

Federal Standards

Cardinal - Colors 

Cardinal - Metallics/Pearlescents/Specialty

Cardinal - Blacks/Greys